Deleting A Logo - Barco ImagePRO-II User Manual

4. Menu Orientation
Using a Logo or Internal Black
To take a logo off display, but keep it in memory, select another input.
aÉäÉíáåÖ=~=içÖç=
Deleting a logo means making it unavailable for use, but not completely removing it from
system memory.

To make a logo unavailable for use, use the following procedure:
1.
92
Original logo format
Logo in lower resolution output
Figure 4-82. Logo Image in Two Different Output Formats
If the logo format is lower resolution than the new output format, the entire logo
appears within the output active area and black bars are placed at the edges as
necessary.
Figure 4-83. Logo Image at Lower Resolution than Output Format
When data security is an issue, it is advisable to erase the
Note
logo rather than delete it. For information, refer to
on page 93.
Logo
Select Logo from the Setup Menu.
Erasing a
ImagePRO-II • User's Guide