Barco ImagePRO-II User Manual page 178

B. Remote Control Protocol
Legacy Remote Commands
obpl=çìí=åå
•
•
•
obpbq
•
•
oqb=áå
•
•
•
pvp^s
•
•
164
Description: Set Output Resolution.
Parameters: out - Output chnl[0-1]
nn: Output Resolution (Use RESH command for resolution list)
Query Format:
RESO? out
Returns the Output Resolution in the format:
= nn

RESO 0 1 (Set Output Resolution of output 0 to resolution index 1
(NTSC(480i))

RESO? (Queries Output Resolution)
Description: Resets the system and sets all settings to factory defaults.
Parameters: None

RESET (Factory reset the ImagePRO-II)
Description: Selects and routes input to be processed.
Parameters:
in: Input [1-7]
1 = DVI, 2 = HD15, 3 = HDMI, 4 = DisplayPort, 5 = SDI,
6 = Black, 7 = Logo
Query Format:
RTE?
Returns the input channel that is routed in the format
= in

RTE 2 (Selects input 2 for processing.)

RTE? (Queries the input channel that is routed.)
Description: Saves the System State to non-volatile memory
Parameters: None

SYSAV (Saves System State.)
ImagePRO-II • User's Guide