Barco ImagePRO-II User Manual page 73

4. Menu Orientation
The options on this menu are:
•
•
•
•
•
ImagePRO-II • User's Guide
Contrast — For outputs, the Contrast adjustment range is 0% to 200%. The
default setting is 100%.
Brightness — The Brightness adjustment range is 0% to 200%. The default
setting is 100%.
Color Balance — The Out Color Balance Submenu, shown in the following
illustration, lets you refine RGB values, plus the Hue and Saturation levels. You
can also restore color balance default settings.
OUT COLOR BALANCE
> Red Contrast
Red Brightness
Green Contrast
Green Brightness
Blue Contrast
Blue Brightness
Hue
Saturation
Reset All
Figure 4-36. Output Color Balance Menu
~ The RGB Contrast and Brightness settings are adjustable within a
range of 0% to 200%. The default setting for all of these properties is
100%.
~ Hue is adjustable within a range of -180 to +180 degrees. The default
setting is 0 degrees.
~ Saturation is adjustable within a range of 0% to 200%. The default
setting is 0%.
~ Reset All resets all custom values to their default settings.
Gamma — This option is adjustable within a range of 0.3 to 3.0. The default
setting is 1.0.
Monochrome — This option sets the color values of the output display to shades
of a single color, typically grayscale. Monochrome is either
setting is Off.
Configuring Outputs
100
100
100
100
100
100
+0
0
or Off. The default
On
59