Barco ImagePRO-II User Manual page 131

5. Web Remote Control Operations
tçêâáåÖ=ïáíÜ=íÜÉ=fåéìí=j~áå=m~ÖÉ
Like the Home page, the Input Main page provides a field for changing the input format. In
addition, you can set contrast, brightness, and gamma values for the current input. You can
also access two submenus — Color Balance and Sizing Adjust.

On the Input Main page:
1.
2.
3.
^ÇàìëíáåÖ=fåéìí=`çäçê=_~ä~åÅÉ=ïáíÜ=íÜÉ=tÉÄ=^éé=fåíÉêÑ~ÅÉ
On the Input Main page, select Color Balance in the side menu. The Color Balance page
appears, as shown in the following illustration. The values for contrast, brightness, and
saturation are in percentages. The values for hue are in degrees.
Figure 5-19. Input Color Balance Page
You can adjust both RGB contrast and RGB brightness within a range of 25% to 150%. The
default setting for both contrast and brightness is 100%.
Hue is measured in degrees. The range is -90 to +90 degrees. The default setting is 0.
Saturation is a percentage, ranging from 0% to 150%. The default setting is 100%.
ImagePRO-II • User's Guide
Select an input.
To change the input format, click the down arrow in the Input Format field and
choose one of the options.
To change contrast, brightness or gamma, click the appropriate slider button and
drag it to the left or right. Alternatively, you can click the number field to the left of
the slider and type a different number. Your change takes effect immediately.
~ Contrast and Brightness values are in percentages, ranging from 25%
to 150%. The default setting is 100%.
~
Gamma values range from 0.3 to 3.0, in 0.1 increments. The default
value is 1.0.
Configuring Inputs with the Web App Interface
117