Barco ImagePRO-II User Manual page 27

2. Hardware Orientation
2)
fåéìí=sáÇÉç=`çååÉÅíçêë
On the system's rear panel, each of the input connectors maps to a corresponding input
button on the front panel. For additional information about any connector, including pinouts
and a list of supported formats, refer to Appendix A, Specifications, on page 131.
3)
4)
5)
6)
7)
lìíéìí=sáÇÉç=`çååÉÅíçêë
The user sets the output format. Output connectors are active only if they support the
selected format. If a connector cannot support the selected format, that connector is
deactivated. Therefore, all connectors may not be active at the same time.
The default output format is 1024x768 @ 59.94. You can select other formats for an output,
or define custom formats. Outputs revert to the last saved state on power-up.
Output colorspace is adjustable for the HD-15, DVI, HDMI, and DisplayPort connectors.
For additional information about any connector, including pinouts and a list of supported
formats for each connector, refer to Appendix A, Specifications, on page 131.
8)
9)
10) DVI-D Output
11) Universal Analog Output
12) HDMI Output
13) DisplayPort Output
dÉåäçÅâ=fåéìí=`çååÉÅíçê
14) Genlock Input BNC with passive Loop-through
ImagePRO-II • User's Guide
Ethernet Port
One RJ-45 connector is provided for 10/100BaseT Ethernet communications
with the ImagePRO-II. The port is used for running the Web Interface, for
diagnostics, and for connection to an external device such as the Encore or
ScreenPRO-II Controller.
The Ethernet connector is compatible with:
~ Standard RJ-45 Ethernet cables
~ Neutrik EtherCon
For pinout details, refer to the
Appendix A, on page 136.
Input 1 — DVI-I Input with Loop-through
Input 2 — Analog Input with Loop-through
Input 3 — HDMI Input
Input 4 — DisplayPort Input
Input 5 — SDI-1 Input with Loop-through
SDI-1 Output
Composite Video Output
The Genlock input supports NTSC and PAL Blackburst, as well as HD tri-level
sync signals, per SMPTE 274M and SMPTE 296M. The passive loop-through can
be used to pass the Genlock signal to another device downstream of the
®
series cables
Standard Connector Pinouts
ImagePRO-II Rear Panel
section in
13