Viewing And Resetting Recent Changes - Barco ImagePRO-II User Manual

5. Web Remote Control Operations
sáÉïáåÖ=~åÇ=oÉëÉííáåÖ=oÉÅÉåí=`Ü~åÖÉë
The Web App Interface Recent Changes page lets you revert most settings in the Setup,
Test Patterns, and Pan/Zoom menus to their previous values after you have made
changes.
The following settings cannot be reset to their default values on this page:
•
•
•
•

To revert one or more settings to their previous values, use the following procedure:
1.
2.
Figure 5-29. Recent Changes Page
ImagePRO-II • User's Guide
Input Format
Output Format
Front Panel Lock
Test Pattern Type
Changes to the Raster Box and Diagonal Motion settings
Note
are displayed on the Recent Changes page and can revert to
their previous settings.
Select an input.
From the Home menu, select Recent Changes. The Recent Changes page
appears, displaying changes made to the selected input's parameters.
~ The first line of each field displays the name of the page and the
parameter that changed, along with the new value for that parameter.
~
The second line displays the value to which you can revert this setting.
~ The Revert to Selected button is not available until you select a value to
revert.
If you made numerous changes to the same parameter, each change is displayed
on this page, and you can select the value to which you want to revert the
parameter.
If this list is long, you can scroll through it using the mouse wheel or the elevator
bar at the right of the page.

Viewing and Resetting Recent Changes

Revert to Selected
Button
Current Setting
Recent Setting
127