Barco ImagePRO-II User Manual page 124

5. Web Remote Control Operations
Web App Interface Features
Figure 5-11. Home Page Side Menu
When you click Setup:
•
•
•
Submenus
Figure 5-12. The Setup Page
As you drill down through submenus, the content of the right side of the page changes only
when you come to a page that contains parameters you can adjust. For example, when you
click Test Patterns on the Home page, the test pattern parameters are displayed on the
right side of the screen. By contrast, if you click Setup on the Home page, the Status
section remains in place until you drill down to the Input Main page.
For an overview of all the menus in the Web App Interface, refer to the
Menu Tree
oçí~íáåÖ=iáëíë
If a field displays a down arrow at the far right, you can click the arrow to display a pop-up
rotating list, as shown in the following illustration. When the list appears, it displays a
pointer to the field you selected, either at the top or the bottom of the menu box. In this
illustration, the list for the Unit field is displayed.
110
The side menu changes to present the Input and Output submenus.
The Back button appears at the upper left corner.
The Status section to the right of the page does not change.
Navigation Button
section on page 113.
Web App Interface
ImagePRO-II • User's Guide