Barco ImagePRO-II User Manual page 102

4. Menu Orientation
Using the System Menu
pÉííáåÖ=aáëéä~ó=_êáÖÜíåÉëë
The VFD Brightness Submenu adjust the intensity of the front panel vacuum fluorescent
display (VFD) screen. The adjustment range is +0 to +6, with +6 being the brightest. The
default setting is +3.
içÅâáåÖ=íÜÉ=cêçåí=m~åÉä
When the ImagePRO-II's front panel is locked, button presses have no effect. In the locked
mode:
•
•
•

To enable and disable the front-panel lock, use the following procedure:
1.
2.
88
EDID Prog Done
<ESC> = Continue
Figure 4-79. EDID Confirmation Message
Using a low intensity is advisable, to avoid "burn-in" of the
Note
display screen.
All button presses and all turns of the ADJUST knob are ignored.
All Ethernet and serial communications commands function normally.
All button lights continue to reflect the correct state of the inputs.
On the System Menu, scroll to Lock Front Panel and press SEL.
The front panel is locked, and the following message appears.
Front Panel
Locked Out.
Figure 4-80. Front Panel Locked Message
To disable the front panel lock, press and hold the SEL and ESC buttons
simultaneously for 3 seconds. When the panel is unlocked, the display screen
displays the Status Menu.
Unit ID 18
ImagePRO-II • User's Guide