Barco ImagePRO-II User Manual page 171

B. Remote Control Protocol
qm
•
•
•
•
•
o^pqbo
•
•
•
ImagePRO-II • User's Guide
Definition: Test Pattern (Output or AOI)
Required Parameters:
--och (output channel): 0,1
--aoi ( AOI test pattern)
Parameters:
--och: 0,1
--aoi
--type:
Off = 0
HGrayRamp = 1
VGrayRamp = 2
100PColorBars = 3
16x16Grid = 4
32x32Grid = 5
Burst = 6
75PColorBars = 7
50PGray = 8
HGraySteps = 9
VGraySteps = 10
White = 11
Black = 12
SMPTE Bars = 13
--diag (diagonal motion): 0 = OFF, 1 = ON
Query Format (AOI Output):
TP --och (output channel) --aoi --?
Query Response: Test Pattern Settings in the following format:
TP --type (Pattern type) --diag (diagonal motion mode)
Definition: RasterBox
Parameters:
--och (output command): 0,1
--aoi (add this option to update AOI raster box — without this option,
updating overall output raster box)
--m (mode): 0 = Off, 1 = On

Example:
RASTER --och 0 --aoi --mode 1
(Enable raster box for Output AOI)
Query Format 1 (Overall Output):
RASTER --och (output channel) --?
ImagePRO-II Remote Commands
157