Launching The Front Panel Emulator - Barco ImagePRO-II User Manual

5. Web Remote Control Operations
The Emulator also provides:
•
•
•
•
For information about using any of the front-panel menus or functions, refer to Chapter 4
Orientation, on page 23.
Menu
i~ìåÅÜáåÖ=íÜÉ=cêçåí=m~åÉä=bãìä~íçê

To launch the Front Panel Emulator, use the following procedure:
1.
Launch the
Front Panel
Emulator
Figure 5-32. Front Panel Emulator Launch Button
2.
3.
4.
ImagePRO-II • User's Guide
SEL and ESC buttons for making selections or backing out of menus
Two navigation buttons — UP and DOWN — to take the place of the ADJUST
knob
All the front-panel Input and Effects buttons
Buttons to launch the Setup, Test Patterns, and Pan/Zoom menus
On the Web App Interface tab, click the Launch button below Front Panel
Emulator (Java Applet).
The Front Panel Emulator is a Java applet that you must install the first time you
use the Emulator. To install it, follow the on-screen instructions.
If the Java applet is installed and you are prompted to run it, select either Run this
time or Always run on this site.
The Front Panel Emulator appears.
Click an Input button to select an input.
Click the SETUP button to access the Setup Menu. The menu appears in the
graphical display screen.
Remotely Accessing Front-Panel Functions
129