Barco ImagePRO-II User Manual page 119

5. Web Remote Control Operations
Emulator is Java-based, it is not available when using Apple devices.
^ÅÅÉëëáåÖ=íÜÉ=tÉÄ=^éé=fåíÉêÑ~ÅÉ
To use the Web App Interface, open an HTML5-compatible web browser. The interface
supports browsers powered by the cross-platform WebKit layout engine. For a list of
supported browsers, click the Webkit link on the Web App Interface tab.
If you use Internet Explorer
Frame, a free plug-in, to access the Web App Interface.
The Web App Interface accesses an ImagePRO-II using the ImagePRO-II's IP address.
The default IP address of the ImagePRO-II is 192.168.0.201. If you work with multiple
units, and each has a unique IP address, you can manage each ImagePRO-II by entering
successive IP addresses in the web browser's address bar.
ImagePRO-II • User's Guide
This chapter assumes the ImagePRO-II is in its factory
Note
default condition when you launch the Web App Interface. If
you connect to an ImagePRO-II that has been adjusted from
factory default condition, the settings you see on any web
page may differ from those illustrated in this chapter.
®
versions 6, 7, 8, or 9, you can download Google Chrome
Web App Interface Introduction
105