Barco ImagePRO-II User Manual page 122

5. Web Remote Control Operations
Web App Interface Features
rëáåÖ=tÉÄ=^éé=fåíÉêÑ~ÅÉ=_ìííçåë=~åÇ=päáÇÉêë
Web App Interface pages display graphic buttons and sliders that let you navigate through
the site, access all inputs and effects, turn options on or off, or select values within a range.
This section discusses each type of graphic.
k~îáÖ~íáçå=_ìííçå
On every page except the Home page, a navigation button appears at the top left of the
interface. This button lets you navigate back one level. The following illustration shows the
two states of the navigation button.
Figure 5-7. Two States of the Navigation Button
•
•
fåéìí=~åÇ=bÑÑÉÅíë=m~åÉä
The panel at the top of the interface displays all the input buttons, plus the LOGO, BLK
(Black), and FRZ (Freeze) effects buttons. This panel remains on display as you navigate
through the site.
Figure 5-8. Input and Effects Button Panel
The buttons on this panel work in exactly the same way as the buttons on the ImagePRO-II
front panel. Click a button to switch inputs, freeze the image, or transition to a logo or
internal black. As you click a button in this panel:
•
•
108
The Back button appears when you click Setup in the side menu. Back lets you
navigate back one level.
The Setup button appears when you enter the Input Menu or Output Menu.
Setup lets you navigate back to the Setup Menu. The Setup button persists as
you navigate down through the Input or Output menu options.
Use this navigation button — not your browser's Back
button or arrow — to navigate back through the Web App
Interface. If you use the browser's navigation tools, you risk
losing your settings.
The button is highlighted in this panel.
The corresponding button on the front panel lights up.
ImagePRO-II • User's Guide