Barco ImagePRO-II User Manual page 84

4. Menu Orientation
Creating Custom Formats
aÉäÉíáåÖ=~=`ìëíçã=cçêã~í
You can delete any custom format from your format library. You cannot delete a system
format.

To delete a custom format, use the following procedure:
1.
2.
3.
4.
70
Be sure the format is not in use before you attempt to delete
Note
it. You cannot delete a format if it is:
•
•
On the Formats Submenu, scroll to Delete and press SEL. The Delete Format
Submenu appears:
DELETE FORMAT
> MyFormat1
Delete
Figure 4-51. Delete Format Submenu
At the format name line, press SEL, and scroll to the file name you want to delete.
Press SEL again.
Scroll down to Delete and press SEL. A prompt appears, asking you to confirm
the deletion.
Delete Format?
<SEL> = Yes
<ESC> = No
Figure 4-52. Delete Format Query
Press SEL to continue with the deletion. Press ESC to cancel the deletion.
If you attempt to delete a format that is in use, the following message appears.
D E L E T E F O R M A T F A I L
F O R M A T I S I N U S E / S A V E D
I N I N P U T C H N L / C O N F I G
< E S C > = C o n t i n u e
Figure 4-53. 'Delete Format Fail' Message
If you see this message, and you still want to delete the format, assign a different
format to any inputs or outputs using this format, then try again.
The current output format, or the output format saved
in the current output configuration
The format used by any of the current inputs, or the
input format saved in any input configuration
MyFormat1
ImagePRO-II • User's Guide