Configuring Inputs With The Web App Interface; Working With The Input Main Page; Adjusting Input Color Balance With The Web App Interface; Sizing, Positioning, And Masking An Image - Barco ImagePRO-II User Manual

5. Web Remote Control Operations

Configuring Inputs with the Web App Interface

For information about setting up transition timings and effects, refer to
Internal Black
cêÉÉòáåÖ=~å=fã~ÖÉ=ïáíÜ=íÜÉ=tÉÄ=^éé=fåíÉêÑ~ÅÉ
To freeze the video image on display, click the FRZ button in the Inputs and Effects panel.
To unfreeze the image, click the appropriate input button to resume the video you froze, or
click another input button to display a different image.
`çåÑáÖìêáåÖ=fåéìíë=ïáíÜ=íÜÉ=tÉÄ=^éé=fåíÉêÑ~ÅÉ
The Input Main page lets you adjust the input format, contrast, brightness, and gamma
settings. In addition, you can access the Color Balance and Sizing Adjust pages from the
side menu on this page.
After configuring the input, you can save your settings for later use and recall them when
necessary. For details about these operations, refer to
with the Web
To access Input Main from the Home page, choose Setup > Input > Input Main.
Figure 5-18. The Input Main Page
The following topics are included in this section:
•
•
•
116
in Chapter 4, on page 89.
Interface, on page 102 of this chapter.

Working with the Input Main Page

Adjusting Input Color Balance with the Web App Interface

Sizing, Positioning, and Masking an Image

Using a Logo or
Backing Up and Restoring Data
ImagePRO-II • User's Guide