Barco iCon H600 Installation Manual
  1. Manuals
  2. Brands
  3. Barco Manuals
  4. Computer Hardware
  5. iCon H600
  6. Installation manual
Barco iCon H600 Installation Manual

Barco iCon H600 Installation Manual

Rgb/video input kit
Hide thumbs Also See for iCon H600:
Table of Contents

Advertisement

Quick Links

Download this manual
RGB/video input kit
Installation Manual
iCon H600, NH-12, Galaxy NH-12
R9843020
R5976888/01
30/07/2008

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iCon H600 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Barco iCon H600

Summary of Contents for Barco iCon H600

  • Page 1 RGB/video input kit Installation Manual iCon H600, NH-12, Galaxy NH-12 R9843020 R5976888/01 30/07/2008...
  • Page 2 Barco nv Presentations Noordlaan 5, 8520 Kuurne Phone: +32 56.36.82.11 Fax: +32 56.35.86.51 E-mail: presentations.bid@barco.com Visit us at the web: www.barco.com Printed in Belgium...
  • Page 3 The period of guarantee begins on the date of transfer of risks, in the case of special systems and software on the date of commissioning, at latest 30 days after the transfer of risks. In the event of justified notice of complaint, Barco can repair the fault or provide a replacement at its own discretion within an appropriate period.

  • Page 5: Table Of Contents

    3. (Re)placing the RGB input on iCon H600 ..............
  • Page 6 Table of contents R5976888 RGB/VIDEO INPUT KIT 30/07/2008...

  • Page 7: Safety

    1. Safety 1. SAFETY Safety warnings ARNING This procedure is intended for use only by BARCO authorized technicians. ARNING Be sure that the projector is powered down and that the power cord is removed from the wall outlet. Wait until the projector is cooled down before starting the procedure.
  • Page 8 1. Safety R5976888 RGB/VIDEO INPUT KIT 30/07/2008...

  • Page 9: Kit Description

    Front screw image 2-1 Fixation nut image 2-2 Side screw image 2-1 Bottom screw image 2-4 Front plate for iCon H600 Front plate for NH-12 / Galaxy NH-12 image 2-5 Image 2-1 Screw Image 2-2 Fixation nut Image 2-3 R5976888 RGB/VIDEO INPUT KIT 30/07/2008...
  • Page 10 2. Kit description Image 2-4 Image 2-5 R5976888 RGB/VIDEO INPUT KIT 30/07/2008...

  • Page 11: Re)Placing The Rgb Input On Icon H600

    3. (Re)placing the RGB input on iCon H600 3. (RE)PLACING THE RGB INPUT ON ICON H600 Upgrade/replacement The following procedure illustrates the replacement of an RGB input board. The same operations must be done in case one wants to add a third RGB input to the projector. Instead of removing (the defective) RGB board one has then to remove the board installed on the desired layer.

  • Page 12: Removing The Lens Cover

    3. (Re)placing the RGB input on iCon H600 Image 3-2 2. Push the top of the basket towards the projector and press it until it locks (’click’ sound) 3.1.2 Removing the lens cover Necessary tools cross headed screwdriver How to remove the lens cover ? 1.

  • Page 13: Removing The Rear Cover

    3. (Re)placing the RGB input on iCon H600 Image 3-4 Image 3-5 Detail of the lens locking handle and pin 3. Pull out the locking pin and flip the lens locking handle to the right (with the index finger) at the same time.
  • Page 14 3. (Re)placing the RGB input on iCon H600 Image 3-7 2. Loosen and remove the 2 front screws Image 3-8 3. Loosen and remove the indicated screw Image 3-9 4. Remove the top cover and disconnect the local keypad connector.

  • Page 15: Removing The Filter Front Plate

    3. (Re)placing the RGB input on iCon H600 Image 3-10 3.1.6 Removing the filter front plate Necessary tools Torx n°10 How to remove the filter front plate 1. Remove the 4 screws fixing the filter front plate Image 3-11 2. Remove the plate Image 3-12 Note: The plate is fixed in 3 holes...
  • Page 16 3. (Re)placing the RGB input on iCon H600 Image 3-13 2. Remove the 4 screws fixing the VGA and the RS232 connector Image 3-14 3. Remove the 2 screws fixing the USB connectors. Note: the 2 screws are fixed with 2 nuts on the rear of the plate : remove gently the plate forwards to access the nuts.

  • Page 17: Removing The Server

    3. (Re)placing the RGB input on iCon H600 Image 3-16 Flip front plate in case it must not be removed (USB connection not removed) When an Audio or other extension module is used on the extra PCI slot, the 2 screws fixing this module should also be removed.
  • Page 18 3. (Re)placing the RGB input on iCon H600 1 piece plate : the plate must be removed Image 3-17 1 piece plate 2 piece plate : remove only the side plate (1) , the server can be slided to the side.
  • Page 19 3. (Re)placing the RGB input on iCon H600 Image 3-20 3. Push the flat cable and the power cable through the hole. Image 3-21 Flat cable and power cable (arrows) and cable bundle 4. Remove the wire bundle from cable protection lock.
  • Page 20 3. (Re)placing the RGB input on iCon H600 Image 3-23 7. 1 piece plate : Remove the indicated screws to allow the server to be slided to the side. Image 3-24 Image 3-25 8. Remove the LVDS connections from the PMP(only in case the server must be completely removed).
  • Page 21 3. (Re)placing the RGB input on iCon H600 Image 3-26 9. Remove the ATX power cable from the power box (only in case the server must be completely removed). Image 3-27 10.Remove the Ethernet connection and the small connector from the PMP (only if server must be completely removed).

  • Page 22: Re)Placing The Rgb Input

    3. (Re)placing the RGB input on iCon H600 Image 3-29 12.Remove the server or place the server on the side in case one must only access the PMP (input side screws) Image 3-30 (Re)placing the RGB input Following procedure shows how to replace the RGB input board on slot 1, the same must be done in case the board is installed on any other slot.
  • Page 23 3. (Re)placing the RGB input on iCon H600 Image 3-31 RGB front screws 3. Remove the server. 4. Remove the side screw on the PMP side and on the lens side. Image 3-32 side screw on slot 4 (in this case it should be slot 1)
  • Page 24 3. (Re)placing the RGB input on iCon H600 Image 3-34 6. Remove the board from the input frame How to mount the (new) input board 1. Insert the (new) board into the empty slot and place it slightly tilted downwards at the right side.
  • Page 25 3. (Re)placing the RGB input on iCon H600 Image 3-37 Side screw for slot 4. The screw to be tightened will depend on the chosen slot Tip: When tightening the screw the board will be “pulled” into the connectors hereby lifting and positioning it horizontally.
  • Page 26 3. (Re)placing the RGB input on iCon H600 R5976888 RGB/VIDEO INPUT KIT 30/07/2008...

  • Page 27: Installing The Rgb/Video Input On Nh-12 And Galaxy Nh-12

    4. Installing the RGB/video input on NH-12 and Galaxy NH-12 4. INSTALLING THE RGB/VIDEO INPUT ON NH-12 AND GALAXY NH-12 Overview • Assembling the RGB/video input board • Removing the rear cover • Removing the top cover • Installation of the RGB/video input board •...

  • Page 28: Removing The Top Cover

    4. Installing the RGB/video input on NH-12 and Galaxy NH-12 Image 4-2 Rear cover: fixing screw 2. Lift the back side of the rear cover and pull it backward to remove it Image 4-3 Image 4-4 Image 4-5 Tilt the back side of the rear cover Pull the rear cover backward Rear cover removed Removing the top cover...

  • Page 29: Installation Of The Rgb/Video Input Board

    4. Installing the RGB/video input on NH-12 and Galaxy NH-12 Image 4-8 Top cover: right screw 2. Lift the top cover to remove it Image 4-9 Top cover: lift to remove Installation of the RGB/video input board The procedure below describes how to install the optional input board in the second slot, but the procedure to install it in the other free slot is similar.
  • Page 30 4. Installing the RGB/video input on NH-12 and Galaxy NH-12 Image 4-10 Free slot: fixing screws of the blanc cover plate Image 4-11 Free slot: blanc cover plate removed 2. Insert the optional input board in the input module Image 4-12 RGB/video input board: inserting 3.

  • Page 31: Installing The Top Cover

    4. Installing the RGB/video input on NH-12 and Galaxy NH-12 Image 4-13 PMP: board-to-board connectors for optional input board Image 4-14 RGB/video input board: plugging in the board-to-board connectors 4. Fix the optional input board to the PMP using a fixing screw Image 4-15 RGB/video input board: fixing side screw 5.

  • Page 32: Installing The Rear Cover

    4. Installing the RGB/video input on NH-12 and Galaxy NH-12 How to install the top cover? 1. Put the top cover in the correct position Image 4-16 Top cover 2. Fix the top cover using four screws Image 4-17 Image 4-18 Top cover: left screw Top cover: right screw Image 4-19...
  • Page 33 4. Installing the RGB/video input on NH-12 and Galaxy NH-12 How to install the rear cover? 1. Put both clamps of the rear cover in the holes on the top cover Tip: The rear cover must be tilted to perform this step! Image 4-20 Installing the rear cover: step 1 2.
  • Page 34 4. Installing the RGB/video input on NH-12 and Galaxy NH-12 R5976888 RGB/VIDEO INPUT KIT 30/07/2008...

  • Page 35: Index

    23, 28 contents installing cover removing rear removing 8, 23–24 lens rear cover top cover replacing description on iCon H600 RGB input replacement front plate filter Safety warnings server installation 8, 25 replacing lens cover removal RGB/video input board installing 23, 27–28...

This manual is also suitable for:

Nh-12Galaxy nh-12

Table of Contents