Barco ImagePRO-II User Manual page 175

B. Remote Control Protocol
f`opq=áå
•
•
f`p^s=áå=ÑáäÉå~ãÉ
•
•
f`rpb=áå
•
•
•
il`hlrq====
•
•
ildla
•
•
ildlf
•
•
ImagePRO-II • User's Guide
filename: The name of the configuration that is being recalled (not case
sensitive).

ICREC 3 file1 (Recalls Input configuration stored as file1 for input 3.)
Description: Reset Input Configuration for the specified input channel.
Parameters: in: Input chnl [1-6]

ICRST 1 (Resets Input configuration for input 1)
Description: Saves Input configuration to non-volatile memory.
Parameters:
filename: The name you give to the configuration when you save it. If
the same input configuration name exists, it will be overwritten.
in: Input chnl (1-6)

ICSAV 3 file1 (saves Input configuration as FILE1 for input channel 3.)
Description: Query the name of the Input configuration used for the specified
channel.
Parameters:
in: Input chnl (1-6)
Returns: Name of the Input configuration used (if any)

ICUSE 1 (Lists names of saved input configurations used by channel 1.)
Description: Locks and unlocks the front panel
Parameter: mode [0 | 1]

LOCKOUT 1 (Lock the ImagePRO-II front panel from user access.)
Description: Delete Logo image from non-volatile memory. Selecting Black/
Logo will now display black.
Parameters: None

LOGOD (Delete saved Logo image.)
Description: Query the stored Logo image resolution.
Parameters: None

LOGOI (Query Logo resolution.)
Off | On
Legacy Remote Commands
161