Recall Config; Delete Config - Barco ImagePRO-SDI Installation Manual

Recall Config

This menu allows the user to recall input configurations that were previously saved for the currently selected input
format and type. Only configurations that match the current format and type will be displayed. In order to recall a
configuration, press SEL. The > sign will change to #. Use the encoder knob to browse the file list. Press SEL to
choose the file you wish to recall. Scroll down to Recall Config and press SEL.

Delete Config

This menu allows the user to delete any input configurations that were previously saved. In order to delete a
configuration, press SEL. The > sign will change to #. Use the encoder knob to browse the file list. Press SEL to
choose the file you wish to delete. Scroll down to Delete Config and press SEL. The following submenu will be
displayed asking you to confirm your choice.
Ensure that the selected file is the one you wish to delete and press SEL, otherwise press ESC.
NOTE: If the deleted input configuration is currently used by any input channel, the system will restore the
format parameters to the default library values for those channels.
36
ImagePRO – Multi Format Image Processor
RECALL CONFIG
> File1
Recall Config
DELETE CONFIG
> File1
Delete Config
Delete File1
<SEL> = Yes
<ESC> = No
?
Manual # 26-0302000-00 / Revision E