Unpacking - AMX Precis DSP Instruction Manual

Installation & Setup
Circuit Overloading
When connecting the equipment to the supply circuits, be aware of the effect that overloading the circuits
might have on over-current protection and supply wiring.
Reliable Earthing (Grounding)
Reliable earthing of rack-mounted equipment should be maintained. If not using a direct connection to the
branch circuit (e.g., plugging into a power strip), pay particular attention to supply connections.
Caution: We recommend attaching all power cords to a surge protector and/or an AC line conditioner.

Unpacking

The Precis DSP is shipped with one enclosure per shipping box. The invoice is sent separately; a packing list
is attached to the outside of each box. Each box contains the following items:
The documentation in each box includes:
For orders comprising multiple enclosures, the shipping boxes are marked as "Chassis __ of __," where the
first blank is the box number and the second blank is the total number of boxes in the shipment.
Unpacking Tips
Note: Please save the original shipping container and packing materials. AMX is not responsible for
damage caused by insufficient packing during return shipment to the factory. Shipping boxes are
available; contact your AMX representative for details.
12
Enclosure
Standard US power cord (if shipped within the US)
Rack ears and screws
Other enclosure products as needed
AMX AutoPatch Precis DSP Quick Start Guide
AMX AutoPatch CD (with APGraphic EQ software for system setup)
Before fully unpacking the enclosure(s), inspect the shipping box(es) for any signs of damage.
If a box is partially crushed or any sides have been broken open, notify the shipping agency
immediately and contact your AMX representative (see the warranty on the AMX AutoPatch CD
or at www.amx.com).
Once unpacking is complete, closely check the physical condition of the enclosure.
Collect all documentation.
Precis DSP Instruction Manual