Filled Eq Graph; Enable Inc/Dec Scene Recall; Show Send Levels In Meter Bridge; Set Eq Band To 0Db With Double-Tap - Yamaha M7CL StageMix V3.0 User Manual

Yamaha Commercial Audio
8.4

Filled EQ Graph

When this preference is ON, the EQ graph will be filled in, as it is on the
M7CL screen. When it is off, only the outline of the graph will be shown.
8.5

Enable Inc/Dec Scene Recall

When this preference is ON, buttons will appear in the Scene Memory
screen that allow instant recall of the Next or Previous Scene Memory.
Refer to section 7.2 for more details.
8.6

Show Send Levels in Meter Bridge

When this preference is ON, the send levels for the currently selected
"MIX ON FADERS" will appear in the "Navigation/Meter Bridge" in
"SENDS ON FADERS" mode. If this preference is OFF, the input levels
will be displayed.
8.7

Set EQ band to 0dB with Double-Tap

When this preference is ON, Parametric and Graphic EQ Gains can be
set to 0dB by double-tapping on the EQ band.
8.8

Set DCA to 0dB with Double-Tap

When this preference is ON, a DCA fader can be set to exactly 0dB by
double-tapping on the fader cap.
8.9 Channel Select – StageMix Follows Console
When this preference is ON, the currently selected channel in the
StageMix Parametric and Graphic EQ screens will follow the Selected
Channel in the M7CL console.
8.10 Channel Select – Console Follows StageMix
When this preference is ON, the Selected Channel in the M7CL
console will follow the currently selected channel in the EQ screens of
StageMix.
M7CL StageMix V3.0 User Guide
Page 31