Fibre Channel Cable Connection (Fibre Channel Type) - Fujitsu Eternus2000 Manual

4.2.2

Fibre Channel Cable Connection (Fibre Channel Type)

Connect the ETERNUS2000 and the server or Fibre Channel switch with Fibre Channel cable.
A 5m Fibre Channel cable is supplied for each Fibre Channel port.
CAUTION
CAUTION
P3AM-2512-03EN ETERNUS2000 disk storage system User Guide
Do
• Before starting, make sure to attach a wrist strap or touch the metal
frame of the device to eliminate static electricity. Failure to discharge
static electricity may cause device failure.
• When connecting external (signal, power, etc.) cables, avoid pulling
them as it may cause damage.
• Before connecting Fibre Channel cables, confirm that the connectors
are clean and free of dust, oil, and grease, etc.
• Fibre Channel cable is thin and breaks easily, so be careful not to
pinch the cable between devices or bend it too much. Keep a 30mm
or larger radius when bending Fibre Channel cable. Failure to do so
may cause device damage or failure.
90˚
Do not bend square
Copyright 2009 FUJITSU LIMITED
30mm
or larger
Do not bind up
Chapter 4 Setup
4
65