Fujitsu Eternus2000 Manual page 98

4.2 Cable Connection
2
74
The following shows the miniSAS connection figure between Controller Enclosure and Drive
Enclosure.
Drive
Enclosure 1
Controller
Enclosure
Figure 4.1 MiniSAS cable connection
(between the Controller Enclosure and Drive Enclosure)
When two or more Drive Enclosures are installed, connect the Drive Enclosures
with miniSAS cable.
2-1 Connect the SAS (OUT) port at expander 0 (EXP#0) of the Drive Enclosure 1, to the
SAS (IN) port at expander 0 (EXP#0) of the Drive Enclosure 2.
Connect the plug to be connected to the SAS (OUT) port, to the SAS (OUT) port of the
expander 0 (EXP#0) for the Drive Enclosure 1.
Drive Enclosure 1
EXP#0
CM#0
ETERNUS2000 disk storage system User Guide
Copyright 2009 FUJITSU LIMITED
EXP#1
CM#1
P3AM-2512-03EN