Fujitsu Eternus2000 Manual page 84

4.1 Prior Preparation
Devices
Prepare the following device:
PC
The initial settings are performed by using a Web browser running on a LAN connected PC. Prepare a
PC installed with one of following Web browsers:
• Web browser
• Software
Networking equipment such as a switching hub
Related manuals
Prepare the following manuals:
"ETERNUS disk storage systems ETERNUSmgr Install Guide"
"ETERNUS disk storage systems ETERNUSmgr User Guide -Introduction-"
"ETERNUS2000 ETERNUSmgr User Guide -Settings/Maintenance-"
"ETERNUS8000, ETERNUS4000, ETERNUS2000 disk storage system Server Connection
Guide
Other related manuals, for example, for a server or switch to be connected to the device.
Power related checks
Refer to
facilities meet the specified requirements.
Number and specifications of the power outlets
60
The ETERNUS2000 can be reset to the factory default network settings
Point
by pressing the Controller Enclosure's IP reset switch twice in succes-
sion within a two second interval.
Microsoft® Internet Explorer 6.0 or later, Mozilla Firefox™ 1.5.0.10 or later, or Netscape 7.1 or
later
Java Runtime Environment 5.0 (Update 11or later) or Java Runtime Environment 6.0 (Update 3 or
later)
For details on the installation procedure of Java Runtime Environment, refer to "ETERNUS2000
ETERNUSmgr User Guide -Setting/Maintenance-".
"ETERNUS2000 ETERNUSmgr User Guide -Setting/Maintenance-"
Point
"3.1.2 Check the number of wall outlets" (page 46)
Copyright 2009 FUJITSU LIMITED
and check that the available power supply
ETERNUS2000 disk storage system User Guide P3AM-2512-03EN