When two battery packs are installed, the pack installed first is charged first. Caution UL Notice: FMW51BC1 / FMW51BC2 External Battery Charger This battery charger is compatible with the following battery packs: FMW51BP1 battery pack FMW29BP2 battery pack...
3. There are two status indicators on the battery charger, one for each slot. The status indicators change colors to represent different battery conditions, as noted in Table 1. When the battery charger is not in use, remove all batteries and disconnect the DC power source.
Battery 2 Green/ON Amber Blink Blink If the battery charger indicates a fault condition with the battery pack, remove the battery pack, disconnect power to the charger, and contact your local help desk or your reseller for further assistance. Status...
58-0581-01.fm Page 4 Tuesday, August 21, 2001 9:28 AM Status Indicators Slide Connector pins Battery slot 2 Battery slot 1 Figure 1. External battery charger Power Battery 1 Battery 2 input Rechargeable battery pack...
58-0581-01.fm Page 5 Tuesday, August 21, 2001 9:28 AM Operational Considerations Issues to consider when you use the FMW51BC1 or FMW51BC2 battery charger are discussed as follows: You can insert up to two battery packs at a time in the battery charger.
58-0581-01.fm Page 6 Tuesday, August 21, 2001 9:28 AM Battery Pack Approximate Charge Time 3-cell FMW51BP1 FMW29BP2 6-cell FMW29BP1 6-cell FMW43BP2 6-cell FPCBP48 FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
58-0581-01.fm Page 8 Tuesday, August 21, 2001 9:28 AM 5200 Patrick Henry Drive Santa Clara, CA 95054 For more information, visit our Web site at: www.fujitsupc.com For technical support call: 1-800-8Fujitsu (1-800-838-5487) or e-mail us at: email@example.com Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu, Ltd. Stylistic is a trademark of Fujitsu PC Corporation.