With No Ac Outlet Box - Fujitsu Eternus2000 Manual

4.2.6.1

With No AC Outlet Box

The following explains how to connect the power codes when no AC outlet boxes are installed.
1
Connect the power cords to the ETERNUS2000.
1-1 Connect the power cord plugs to the power inlets of the Power Supply Units.
1-2 Attach the release tie to the plug of the power outlet for the power plug not to be
2
Connect the power cords to the power outlet.
Connect the plug at the other end of each power cord to the power outlet.
P3AM-2512-03EN ETERNUS2000 disk storage system User Guide
Drive Enclosure
Controller Enclosure
unplugged.
Do Not
WARNING
• Do not connect power cords or other cables during thunder-
storms, as lightning can result in fire or electric shock.
Copyright 2009 FUJITSU LIMITED
Inlet
Power cord plug
Release Tie
Chapter 4 Setup
4
77