Fujitsu Eternus2000 Manual page 159

11
Check the "Expansion procedure" checkbox, and click the [Next >] button.
The drive enclosure installation process is performed. When the process completes, the drive
enclosure's AUTO POWER switch check procedure screen is displayed.
12
Set or check the drive enclosure's AUTO POWER switch per the instructions dis-
played on the screen.
When the controller enclosure's AUTO POWER switch is ON
The following screen is displayed.
P3AM-2512-03EN ETERNUS2000 disk storage system User Guide
Copyright 2009 FUJITSU LIMITED
Chapter 5 Installing Optional Products
5
135