Fujitsu Eternus2000 Manual page 190

Disk storage system
Hide thumbs Also See for Eternus2000:
Table of Contents

Advertisement

A.1 Base Device Specifications
iSCSI type
Table A.5
Model name
Supported RAID level
Maximum
capacity
Number of controllers
Host interface
Number of host interfaces
Maximum number of servers to be connected
Cache
Number of disk drives
Disk drive
Dimensions
(W × D × H)
Service area requirements
Maximum weight
Power
Maximum power consumption
Maximum heat generation
Environmental
conditions
*1: Physical capacity is calculated based on the assumption 1TB=1,000GByte, 1GB=1,000MByte.
*2: Logical capacity is calculated based on the assumption 1TB=1,024GByte, 1GB=1,024MByte and being formatted in
the recommended RAID5 configuration. The possible capacity for use depends on the environment conditions.
166
Specification (ETERNUS2000 model 200 iSCSI type)
Item
SAS disk drives
Physical
Nearline SAS
capacity (*1)
disk drives
SAS disk drives
Logical
Nearline SAS
capacity (*2)
disk drives
Capacity/Speed
SAS disk
drives
Drive interface
Capacity/Speed
Nearline SAS
disk drives
Drive interface
Basic
Maximum
Voltage
Phase
Frequency
AC 100 – 120V
AC 200 – 240V
AC 100 – 120V
AC 200 – 240V
Temperature
Humidity
ETERNUS2000 disk storage system User Guide
Copyright 2009 FUJITSU LIMITED
Specification
E220L4CU (4 port type)
RAID0, RAID1, RAID1+0, RAID5, RAID6
54.0TB
120.0TB
39.6TB
88.6TB
2
iSCSI (up to 1Gbps)
4
128
4GB
2 to 120
450GB/300GB/146GB (15,000rpm),
400GB (10,000rpm)
SAS (up to 3Gbps)
1TB/750GB/500GB (7,200rpm)
SAS (up to 3Gbps)
483 × 673 × 88 (mm) [2U]
483 × 673 × 880 (mm) [20U]
Front: 800mm or larger, Rear: 800mm or larger
350kg
AC 100 – 120V, AC 200 – 240V
Single
50Hz/60Hz
3,835W
3,640W
13,806kJ/h
13,104kJ/h
5 – 35°C (operating)
0 – 50°C (not operating)
20 – 80%RH (operating)
8 – 80%RH (not operating)
P3AM-2512-03EN

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

100200

Table of Contents