When the controller enclosure's AUTO POWER switch is OFF
The following screen is displayed. Check that the drive enclosure's AUTO POWER switch is OFF,
and click the [Next>] button.
The expansion completion screen is displayed.
IMPORTANT
P3AM-2512-03EN
ETERNUS2000 disk storage system User Guide
On the Number of Expansion Setting screen in
ber other than "1" is set for the number of drive enclosures, the
expansion completion screen is not displayed and the drive
enclosure recognition process is repeated. In this case, turn the
ETERNUS2000 off and on again.
Copyright 2009 FUJITSU LIMITED
Chapter 5 Installing Optional Products
Step
6, if a num-
5
137