Fujitsu Eternus2000 Manual page 81

2 Attach the blind cover using two black M5 screws to the rack pillars.
3.2.3.2 For 4U AC outlet box
This section describes how to mount the 4U AC outlet box in a rack.
IMPORTANT
1
Refer to "ETERNUS2000 models 100 and 200 disk storage system Package
Contents" to confirm there are no missing parts for the rack mount kit.
2
Attach the ACS plate to the rack.
Screw
holder
M6
screws
P3AM-2512-03EN ETERNUS2000 disk storage system User Guide
AC outlet box
Rear rack pillars
When installing an 4U size AC outlet box, 1U size is required for the
bottom of the pillar to store cables.
When the holes in the rack pillars are square, use the screw hold-
Point
ers to attach.
ACS plate
(Rear rack pillars)
M6
screws
Copyright 2009 FUJITSU LIMITED
M5 screw
Blind cover plate
Front rack pillars
ACS plate
Screw
holder
Chapter 3 Installation
M5 screw
3
57