Fujitsu Eternus2000 Manual page 97

1
Connect the Controller Enclosure to the Drive Enclosure with miniSAS cable.
1-1 Connect the SAS (OUT) port at controller 0 (CM#0) of Controller Enclosure, to the
1-2 Connect the SAS (OUT) port at controller 1 (CM#1) of Controller Enclosure, to the
P3AM-2512-03EN ETERNUS2000 disk storage system User Guide
SAS (IN) port at expander 0 (EXP#0) of the Drive Enclosure 1.
Connect the plug to be connected to SAS (OUT) port, to the SAS (OUT) port of the controller
0 (CM#0).
Controller
Enclosure
Connect the plug to be connected to SAS (IN) port, to the SAS (IN) port of the expander 0
(EXP#0).
Drive
Enclosure 1
SAS (IN) port at expander 1 (EXP#1) of the Drive Enclosure.
Connect the miniSAS cable in the same way as
Copyright 2009 FUJITSU LIMITED
Step 1-1.
Chapter 4 Setup
4
73