Fujitsu Eternus2000 Manual page 78

3.2 Rack Installation
4
5
6
7
8
54
Tighten the screws that were moved in
Remove the front cover of the drive enclosure.
Refer to "2.2.3 Attaching and Removing the Front Cover" (page 40)
front cover.
Install the drive enclosure in the rack.
CAUTION
When installing or removing the controller enclosure to or from the
rack, contact your sales representatives or maintenance engineer.
Fix the drive enclosure in the rack.
Fix the drive enclosure in the rack with hand screws in front of the controller enclosure.
Thumb screw
Replace the front cover.
Refer to "2.2.3 Attaching and Removing the Front Cover" (page 40)
front cover.
Copyright 2009 FUJITSU LIMITED
Step 2.
Do
(Rear rack pillars)
ETERNUS2000 disk storage system User Guide
for procedure to remove the
for procedure to replace the
P3AM-2512-03EN