Installable Battery Unit; Battery Unit Installation Position; Additional Battery Unit Installation Procedure - Fujitsu Eternus2000 Manual

5.3 Battery Unit Installation
5.3.2

Installable Battery Unit

Refer to
At time of purchase, the battery unit model may be different from those described.
The latest manual is available via the following web-site, and should be referred to as necessary.
http://www.fujitsu.com/global/services/computing/storage/system/eternus2000/
5.3.3

Battery Unit Installation Position

Battery units can be installed after removing the fan unit.
Figure 5.2
5.3.4

Additional Battery Unit Installation Procedure

This section describes how to install the battery unit in the ETERNUS2000.
140
"A.2.3 Additional Battery Unit Option" (page 171)
Battery unit
installation position
Position of Battery Unit
Do Not
WARNING
• Do not install any battery units that are not FUJITSU authorized, as
they may damage the device and/or cause fire or electrical shock.
• Do not damage or modify the internal cables or ETERNUS2000 when
installing the battery unit, as they may damage the device and/or cause
fire or electrical shock.
Do
CAUTION
• If additional battery units are installed in a way other than by the meth-
ods described herein, damage to the device and/or failure or electrical
shock may occur.
for a list of battery units that may be installed.
ETERNUS2000 disk storage system User Guide
Copyright 2009 FUJITSU LIMITED
P3AM-2512-03EN