Fujitsu Eternus2000 Manual page 154

5.2 Drive Enclosure Installation
6
7
8
130
Install the drive enclosure in the rack.
CAUTION
• Before installing the drive enclosure in or removing it from the
rack, contact your sales representatives or maintenance engi-
neer.
Fix the drive enclosure in the rack.
Fix the drive enclosure to the rack with two thumb screws at the front of the controller enclosure.
Thumb screw
Attach the "DE_No." label to the following positions.
Attach the label starting at the top (miniSAS cable (for drive enclosures) connection order) on the
controller enclosure.
At the right side of the
front of the drive enclosure
DE_No. label
Copyright 2009 FUJITSU LIMITED
Do
(Rear rack pillars)
Under the power unit (PSU#0) at
the rear of the drive enclosure
DE_No. label
ETERNUS2000 disk storage system User Guide P3AM-2512-03EN