Fujitsu Eternus2000 Manual page 168

5.3 Battery Unit Installation
11
12
144
Insert the new battery unit all the way into the slot, making sure that it is firmly
seated.
The following example shows a battery unit being installed in the bottom of the device.
• Hold the battery unit with both hands to protect against jar-
IMPORTANT
• Insert the battery unit until the lock lever hooks reach the slot
Check all the "Battery Unit expansion procedure" checkboxes, and click the
[Next >] button.
The battery unit expansion process is performed.
After a while, the expansion results are displayed.
Copyright 2009 FUJITSU LIMITED
Battery Unit
ring.
protrusions.
ETERNUS2000 disk storage system User Guide P3AM-2512-03EN