Skip Channel Setting; Scan Operation - Icom IC-E2820 Instruction Manual

■ Skip channel setting

The memory skip function speeds up scanning by checking
only those memory channels not set as skip channels. Set
skip channels as follows.
Skip indicator appears
q Select a memory channel in the desired band
➥ Push the desired band's [M/CALL•MW] to select mem-
ory mode.
➥ Rotate the same band's [DIAL] to select the desired
channel to be a skip channel.
w Push [F•
] to display the function guide.
ePush [SKIP](TONE•DTMF) to select the skip condition
from "≈," "P≈" or "OFF
(no indication)
nel.
• "≈" (SKIP) : The channel is skipped during memory or bank
scan.
• "P≈" (PSKIP) : The channel is skipped during memory/bank scan
and the programmed scan.
• "__" (OFF) : The channel is scanned during any scan.
rPush [F•
] once or twice to exit the function guide indi-
cation.
:
(Left or Right)
" for the selected chan-

SCAN OPERATION

8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
78