Icom IC-E2820 Instruction Manual page 69

D D One-touch reply
qAfter receiving a call, push [F•
function guide 2.
wPush [R>CS](TONE•DTMF) to set the received call sign as
for the call.
[R>CS]
D D One-touch reply using the call record
The stored call signs in the call record can be used to the call.
qPerform the steps q and w of "D Desired call record indi-
cation" described on the previous page.
➥ When selecting a call record via MENU screen:
w Push [MAIN•BAND] to display the call record details.
ePush [R>CS](V/MHz•SCAN)
ceived call sign to that of the call record.
➥ Setting from function guide 2:
wPush [R>CS](TONE•DTMF) to set the received call sign to
that of the call record.
After the above operations, push [PTT] to transmit; release
to receive.
DV MODE OPERATION (Optional UT-123 is required)
] twice to display the
to set the re-
(Left band's)
NOTE:
• Set your own call sign (MY) in advance.
• The call sign stored in "CALLER" is stored as "YOUR,"
"RXRPT1" is stored as "RPT2" and "RXRPT2" is stored
as "RPT1."
• Error beeps sound when a call sign is received incor-
rectly, and no call sign is set in this case.
Important!
Setting call signs with the "One-touch reply using the call
record" operation as at left are for temporary operation only.
Therefore, the set call signs will be overwritten when an-
other call record is used to set call signs.
• Never save into a call sign memory.
If you want to save the set call signs, see "Copying the call
record contents into call sign memory"
✔ For your information
When a call specifying your call sign is received, the call signs
of the calling station and the repeater it is using can be used
for operation automatically.
• When "RX call sign auto write"
station call sign in "CALLER" is set to "YOUR" automatically.
• When "Repeater call sign auto write"
"AUTO," the stored station call sign in "RXRPT1" is stored
as "RPT2" and "RXRPT2" is stored as "RPT1" automatically.
5
(p. 39)
for details.
(p. 50)
is set to "AUTO," the
(p. 101)
is set to
(p. 102)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
48