Dv Mode Operation (Optional Ut-123 Is Required); Digital Mode Operation; Call Sign Programming - Icom IC-E2820 Instruction Manual

5
DV MODE OPERATION

■ Digital mode operation

The IC-E2820 can be operated in digital voice mode and low-
speed data operation for both transmit and receive when the
optional UT-123 is installed. Also, position data transmission
and reception are available with the UT-123. A GPS antenna
is supplied with the UT-123.
35
(Optional UT-123 is required)

■ Call sign programming

Four types of call sign memories are available: your own call
sign "MY CALL SIGN," other station call sign "YOUR CALL
SIGN," repeater call sign "RPT1 CALL SIGN" and "RPT2
CALL SIGN." "MY CALL SIGN" can store up to 6 call signs,
"YOUR CALL SIGN" can store up to 60 call signs and
"RPT1/2 CALL SIGN" can store up to 60 call signs, and each
call sign can be programmed with up to 8 characters.