Icom IC-E2820 Instruction Manual page 64

5
DV MODE OPERATION (Optional UT-123 is required)
D D Repeater operation in the same zone
qSet the desired repeater's frequency, offset and shift direc-
tion in the main band.
• Select DV mode in advance. (p. 21)
w Set your own call sign.
• See p. 36 for your own call sign programming.
e Set the desired station call sign.
• See p. 38 for station call sign programming.
r Set the repeater's call sign as follows;
z Push [F•
] twice to display the function guide 2.
xPush [CS](V/MHz)
SIGN" screen.
cRotate
[DIAL]
[MAIN•BAND].
• RPT1 CALL SIGN screen is displayed.
vRotate [DIAL] to select the nearest repeater's call sign
then push [BACK](V/MHz)
bRotate
[DIAL]
[MAIN•BAND].
• RPT2 CALL SIGN screen is displayed.
nRotate [DIAL] to select the desired repeater's
call sign.
same zone)
• Select "NOT USE✱" when not operating RPT2.
43
(pgs. 30, 31)
(p. 38)
(p. 39)
to display the "CALL
(Left band's)
to select "RPT1," then
.
(Right band's)
to select "RPT2" then
mPush [BACK](V/MHz•SCAN)
SIGN" screen.
t Push [PTT] to transmit; release to receive.
push
push
(in the
to exit "CALL
(Right band's)