Memory Bank Selection - Icom IC-E2820 Instruction Manual

6
MEMORY MODE OPERATION

■ Memory bank selection

The IC-E2820 has a total of 26 banks
channels, regular channels, scan edges and call channels are
assigned into the desired bank for easy memory management.
qPush the desired band's [M/CALL•MW] several times to
select memory mode, if desired.
wPush and hold the same band's [MAIN•BAND] for 1 sec.
• The memory channel number blinks.
eRotate the same band's [DIAL] to select the desired bank,
A to Z.
• Banks that have no programmed contents are skipped.
rPush the same band's [MAIN•BAND] to set the bank
group.
• Bank initial and bank channel stop blinking.
tRotate the same band's [DIAL] to select the desired bank
channel.
yTo return to regular memory mode, push and hold the
same band's [MAIN•BAND] for 1 sec., rotate the same
band's [DIAL] to select memory channel number indica-
tion, then push the same band's [MAIN•BAND].
[MAIN•BAND]
63
. All memory
(A to Z)
Bank initial and bank
channel blink
z Push [MR/CALL] to select memory mode, if de-
BANK
sired.
x Push [FUNC] then [
memory bank condition.
Or, push and hold [BAND] for 1 sec. to select
memory bank condition.
Y/Z
• Memory channel blinks
c Push [Y]/[Z] to select the desired bank, A to Z.
• Only programmed memory bank can be selected.
v Push [
A(MW)] to set the bank.
CLR
Or, push [BAND] to set the bank.
• Bank initial and bank channel stops blinking.
b Push [Y]/[Z] to select the desired contents in
the bank.
n To return to regular memory condition, push
[FUNC], [ 1(BANK)] then push [Y]/[Z] to
MONI
select memory channel number indication.
Or, push and hold [BAND] for 1 sec., then push
[Y]/[Z] to select memory channel number indi-
cation.
1(BANK)] to select
MONI