Scan Items - Icom IC-E2820 Instruction Manual

13
MENU SCREEN OPERATION

■ SCAN items

D D Scan timer
Selects scan resume timer from T-15
P-2.
• T-15/10/5 : Scan pauses for 15/10/5 sec., then resumes.
• P-2 : Pause on a signal until signal disappears,
then resumes 2 sec. after the signal disap-
pears.
D D Program skip scan
Sets programmed skip scan setting from ON
OFF for full scan or programmed scan operation.
103
, T-10, T-5 and
(default)
and
(default)
D D Bank link scan
Sets the memory bank link function ON and OFF
link function provides continuous bank scan, scanning all con-
tents in the selected banks during bank scan.
• Bank link setting
q Enter MENU screen via function guide.
➥ Push [F•
] to display function guide.
➥ Push [MENU](V/MHz•SCAN)
MENU screen.
w Rotate [DIAL] to select "SCAN," then push [MAIN•BAND].
e Rotate [DIAL] to select "BANK LINK," then push
[MAIN•BAND] to enter bank setting.
r Rotate [DIAL] to select the desired bank initial, then push
[MAIN•BAND].
t Rotate [DIAL] to turn ON
(default)
then push [MAIN•BAND].
y Rotate [DIAL] to select next bank and repeat steps r to
t, or push [BACK](V/MHz•SCAN)
times to exit scan set mode.
. The
(default)
to enter
(Right band's)
and OFF the link setting,
three
(Right band's)