Memory Clearing - Icom IC-E2820 Instruction Manual

6
MEMORY MODE OPERATION

■ Memory clearing

Contents of programmed memories can be cleared (blanked),
if desired.
qPush [V/MHz•SCAN] to select VFO mode in the desired
band .
(left or right)
wPush and hold the same band's [M/CALL•MW] for 1 sec.
• "X" indicator and the memory channel number blink.
eRotate [DIAL] to select the memory channel to be cleared.
r Push and hold [CLR](DUP•MONI) for 1 sec. to clear.
• 3 beeps sound, then the frequency is cleared.
• "X" indicator and the channel number blink continuously.
• When clearing the call channel, the current VFO conditions are
re-programmed into the call channel automatically.
[EXAMPLE]: Clearing memory channel 20.
V/MHz
Push (Main band's) to select VFO.
SCAN
69
Push and hold
CLR
DUP
Push and hold for 1 sec. memory clearing.
MONI
"
"
Beep
"
Beep
" Beep
"
tPush [BACK](V/MHz•SCAN)
mode.
NOTE: Be careful!— the contents of cleared memories
CANNOT be recalled.
M/CALL
(Main band's) for 1 sec.
MW
Push
(Right band's)
Rotate (Main band's) for selecting
memory channel to be cleared.
BACK
V/MHz
.
SCAN
to return to VFO