Gps/Gps-A Operation; Gps Operation - Icom IC-E2820 Instruction Manual

15

GPS/GPS-A OPERATION

■ GPS operation

A GPS receiver is built-in to the optional UT-123. When UT-
123 is installed, GPS operation that indicate the current posi-
tion (Latitude and Longitude) and time is available. The
position data can also be transmitted with a message to an-
other station.
to [GPS ANT]
GPS antenna
GPS antenna cable length: approx. 5 m (16.4 ft)
121
D D GPS function
qWhile in DV mode operation, push [F•
function guide.
wPush [MENU](V/MHz•SCAN)
screen.
[F• ]
[MENU]
eRotate [DIAL] to select "SET MODE," then push
[MAIN•BAND] to enter set mode.
rRotate [DIAL] to select "GPS" then push [MAIN•BAND].
tRotate [DIAL] to turn the GPS function ON and OFF, then
push [MAIN•BAND]
• Select "OFF" to deactivate the GPS function.
] to display the
to enter MENU
(Right band's)