Transmitting A Dtmf Tone Sequence - Icom IC-E2820 Instruction Manual

■ Transmitting a DTMF tone sequence

D Automatic transmission (DTMF memory)
qPush and hold [TONE•DTMF] for 1 sec. to enter DTMF set
mode.
wRotate [DIAL] to select
[MAIN•BAND] to enter DTMF memory screen.
eRotate [DIAL] to select the desired DTMF memory channel
to be transmitted then push [BACK](V/MHz•SCAN)
.
band's)
• Returns to DTMF set mode screen.
rRotate [DIAL] to select "AUTO TX," then push
[MAIN•BAND].
t Rotate [DIAL] to select "ON," then push [MAIN•BAND].
☎
• " " appears.
yPush [BACK](V/MHz•SCAN)
DTMF set mode.
u Push [PTT] to transmit the selected DTMF memory content.
iTo cancel the DTMF tone sequence automatic transmis-
sion, select "OFF" in step t.
• When the DTMF encoder is turned ON continuously, each push
of the PTT transmits the previously selected DTMF tone se-
quence.
DTMF MEMORY, then push
" "
(Right
to exit from
(Right band's)
DTMF MEMORY ENCODER
z Push [FUNC] then [
DTMF DTMF memory encoder ON.
☎
• " " appears.
x Push [PTT] to transmit the previously selected
DTMF memory.
c Push [FUNC] then [
DTMF memory encoder.
• When the DTMF encoder is turned ON continuously,
each push of the PTT transmits the previously se-
lected DTMF tone sequence.
10
6(DTMF)] to turn the
LOW
B(D-OFF)] to cancel the
SET
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
82