Menu Screen Operation; General - Icom IC-E2820 Instruction Manual

13

MENU SCREEN OPERATION

■ General

MENU screen is used for programming infrequently changed
values or conditions of functions.
• Entering MENU screen and operation
q Push [F•
] to display the function guide.
w Push [MENU](V/MHz•SCAN)
screen.
[MENU]
e Rotate [DIAL] to select the desired menu group, then push
[MAIN•BAND].
r Rotate [DIAL] to select the desired item, then push
[MAIN•BAND].
t Rotate [DIAL] to select the desired condition or value, then
push [MAIN•BAND].
y Push [F•
] to return to frequency indication or push
[BACK](V/MHz•SCAN)
screen.
95
to enter MENU
(Right band's)
to return the previous
(Right band's)
z Push [
B(D-OFF)] to enter MENU screen.
SET
SET
x Push [Y] or [Z] to select the desired menu group,
B
then push [ B(D-OFF)] to enter the appropri-
SET
ate set mode.
c Push [Y] or [Z] to select the desired item, then
push [ B(D-OFF)].
SET
v Push [Y] or [Z] to select the condition or value
then push [ B(D-OFF)].
SET
b Push [
A(MW)] to exit set mode or push
CLR
[ C(T-OFF)] to return to the previous indica-
ENT
tion.