Testing; Example Test - Qlogic 3400 series User Manual

6

Testing

This chapter contains a testing example and describes how to check the VMS on
the host and compute host levels.

Example Test

In this example, two VMs are created. A VM named P1 is created on one host
using the Compute1 node; a VM named P2 is created on a different host using the
Compute2 node.
To ensure that the VMs are up and running:
1.
2.
Log in to the system using either a floating IP address or the Horizon
dashboard Instance log in console. For the 45000 Series Adapters, ensure
that the correct version of the qede/qed driver has been loaded (see
"Installing Required Packages and System Configurations" on page
Ping between the two VMs with an IP demo-net assigned IP address.
Following is a sample output.
14
4).
83840-546-03 B