3–Fibre Channel Configuration
Using Fast!UTIL for Custom Configuration
Fibre Disk Utility
The Fibre Disk Utility option scans the Fibre Channel loop and lists all the
connected devices by loop ID. You can select a Fibre Channel hard disk and do
one of the following tasks:
Perform a low-level format
Verify the disk media
Verify the disk data (Some targets do not support this feature.)
Select a disk device
CAUTION
Performing a low-level format destroys all data on the disk.
Loopback Data Test
The Loopback Data Test option allows you to perform the following loopback
tests:
External loopback data test
Internal loopback data test
NOTE
When running an external loopback data test, make sure that the Fibre
Channel link is up or a loopback plug is attached to the 2700 Series Adapter
before starting the test.
Select Adapter
If you have a multiport or multiple 2700 Series Adapters in the system, use the
Select Adapter option to select and then configure or view the settings of a
specific 2700 Series Adapter or one of its ports.
Exit Fast!UTIL
The Exit Fast!UTIL option allows you to exit the utility and reboot the system.
After making changes to the 2700 Series Adapter in Fast!UTIL, make sure you
save the changes before you reboot the system.
42
BK3254601-00 C