Command Mode
MST Configuration mode
User Guidelines
•
There are no user guidelines for this command.
Example
The following example exits the MST configuration mode without saving changes.
Console(config) # spanning-tree mst configuration
Console(config-mst) # abort
spanning-tree mst mstp-rstp
Use the spanning-tree mst mstp-rstp global configuration command to configure the switch to
convert STP/RSTP packets to MSTP instances. Use the no form of this command to disable the
configuration.
Syntax
spanning-tree mst mstp-rstp
no spanning-tree mst mstp-rstp
This command has no arguments or keywords.
Default Configuration
Disabled.
Command Modes
Global configuration
User Guidelines
•
This command can be enabled when all the ports are Access ports.
•
This command is relevant in MSTP mode only.
•
When this feature is enabled, incoming IEEE RSTP/STP packets would be mapped to the
MSTP instance according to the port's VLAN. Outgoing MSTP packets would be mapped to
IEEE RSTP/STP packets according to the port's VLAN.
Example
The following example configures the switch to convert STP/RSTP packets to MSTP instances.
Console(config)# spanning-tree mst mstp-rstp
262
Spanning-Tree Commands