Advertisement
mdix
name
negotiation
port monitor
port security
port security routed secure-
address
port storm-control broadcast
enable
qos cos
qos trust (Interface)
rmon collection history
shutdown
sntp client enable (interface)
spanning-tree cost
spanning-tree disable
spanning-tree link-type
spanning-tree portfast
spanning-tree port-priority
speed
LC (Line Configuration) Mode
Command
enable authentication
exec-timeout
login authentication
history
history size
30
Command Modes
Enables automatic crossover on a given interface.
Configures a name to a VLAN.
Enables auto-negotiation operation for the speed and duplex parameters
of a given interface.
Starts a port monitoring session.
Disables new address learning/forwarding on an interface.
Adds MAC-layer secure addresses to a routed port.
Enables broadcast storm control.
Configures the default port CoS value.
Enables each port trust state while the system is in basic mode.
Enables a Remote Monitoring (RMON) MIB history statistics group on
an interface.
Disables interfaces.
Enables the Simple Network Time Protocol (SNTP) client on an
interface.
Configures the spanning tree path cost for a port.
Disables spanning tree on a specific port.
Overrides the default link-type setting.
Enables PortFast mode.
Configures port priority.
Configures the speed of a given Ethernet interface when not using
auto-negotiation.
Description
Specifies the authentication method list when accessing a higher
privilege level from a remote telnet or console.
Configures the interval that the system waits until user input is detected.
Specifies the login authentication method list for a remote telnet or
console.
Enables the command history function.
Changes the command history buffer size for a particular line.
Advertisement
