Advertisement
Syntax
snmp-server group groupname {v1 | v2 | v3 {noauth | auth | priv} [notify notifyview ] } [context
name] [read readview] [write writeview]
no snmp-server group groupname [v1 | v2 | v3 [noauth | auth | priv]] [context name]
•
groupname — The name of the group. (Range: Up to 30 characters)
•
v1 — SNMP Version 1 security model.
v2 — SNMP Version 2 security model.
•
•
v3 — SNMP Version 3 security model.
•
noauth — Specifies no authentication of a packet. Applicable only to SNMP Version 3
security model.
•
auth — Specifies authentication of a packet without encrypting it. Applicable only to
SNMP Version 3 security model.
priv —Specifies authentication of a packet with encryption. Applicable only to SNMP
•
Version 3 security model.
•
context name — Specifies context of packet.
read readview — A string that is the name of the view that enables you only to view the
•
contents of the agent. If unspecified, all the objects except of the community-table and
SNMPv3 user and access tables are available. (Range: Up to 30 characters)
•
write writeview — A string that is the name of the view that enables you to enter data and
configure the contents of the agent. If unspecified, nothing is defined for the write view.
(Range: Up to 30 characters)
•
notify notifyview — A string that is the name of the view that enables you to specify an
inform or a trap. If unspecified, nothing is defined for the notify view. (Range: Up to 30
characters)
Default configuration
No group entry exists.
Command Mode
Global configuration
User Guidelines
•
The Router context is translated to "" context in the MIB.
227
SNMP Commands
Advertisement
