Advertisement
Default Configuration
The default configuration is 10 minutes.
Command Mode
Line Configuration mode
User Guidelines
•
To specify no timeout, enter the "exec-timeout 0" command.
Examples
The following example configures the interval that the system waits until user input is detected to
20 minutes.
console(config)# line console
console(config-line)# exec-timeout 20
show line
The show line User EXEC mode command displays line parameters.
Syntax
show line [console | telnet | ssh]
•
console — Console terminal line.
•
telnet — Virtual terminal for remote console access (Telnet).
•
ssh — Virtual terminal for secured remote console access (SSH).
Default Configuration
If line is not specified, the default value is console.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
156
Line Commands
Advertisement
