Default Setting
The default configuration revision number is 0.
Command Mode
MST Configuration mode
User Guidelines
•
There are no user guidelines for this command.
Example
The following example sets the configuration revision to 1.
Console(config) # spanning-tree mst configuration
Console(config-mst) # revision 1
show (mst)
The show
MST
configuration.
Syntax
show {current | pending}
•
current — Indicates the current region configuration.
•
pending — Indicates the pending region configuration.
Default Setting
This command has no default configuration.
Command Mode
MST Configuration mode
User Guidelines
•
The pending MST region configuration takes effect only after exiting the MST configuration
mode.
Example
The following example displays a pending MST region configuration.
Console(config-mst)# show pending
Pending MST configuration
260
Spanning-Tree Commands
Configuration mode command displays the current or pending MST region